ESD Series

ESD Series

Programmable DC Power Supply

§ Single system up to 500kW, and parallel system up to 2MW

§ Output voltage up to 2000V(std), higher voltage can be customized

§  Applications: battery simulation, battery test (-BSS option), PV simulation (-PV option)

§ Program accuracy up to 0.1%

§ Seamless transition between source and sink modes (-R option)

§  Current rise time (10% -90%) <1ms (-BSS option)

§ Soft start: effectively restrain the impulse current when power on

§ CC/CV/CP/CR mode available

§ Regenerative DC load function (-LD option)

§ Hardware & software for PV Simulation (-PV option)

§ Low-Voltage operation mode (-ZV option)

§ Master-Slave interface (-MS option)

§ Use water-cooling (-W option)

§ LAN/RS485 interfaces (standard), CAN/RS232/ATI interfaces (optional)

§ Emergency stop button and indicators on front panel

§ TFT-Touch panel operation

§ Mod-bus/SCPI protocols

§ Output terminal insulation monitoring function(-INS option)

§ Output contactor

§ Remote sense

§ CE conformity

Build time: Form 9 weeks

ESD-E Datasheet 4.4 (EN).pdf
ESD Datasheet 4.4 (EN).pdf
ESD Series User Manual (EN) V2.0.pdf
ESD PV Option.pdf
ESD BSS Option.pdf
ESD Demo
Part of ESD 400kW

BriPower ESD series  Programmable DC Power Supply

ESD Series

ESD Series


The BriPower ESD series is IGBT PWM switching DC power supply, which contains multi output power levels from 30kW to 500kW for single system, up to 4 individual systems can be paralleled to up to 2MW system. Output power level of customized system goes up to 4MW and above.

ESD series uses bi-directional design, which makes it possible to be used as DC power source or regenerative DC load. CV/CC/CP/CR operation modes are available for both sourcing and sinking.

With touch panel on the front panel, user can control the power source with GUI software. System status indicators and emergency stop button are also installed on the front panel. Programming interfaces including RS485 and LAN interfaces are standard, and optional RS232, CAN, analog control interfaces are available for automated test applications.

AC Input Configuration

Please specify the input voltage (L-L)

-208, Input Voltage 208V±10%, 3-phase

-230, Input Voltage 230V±10%, 3-phase

-380, Input Voltage 380V±10%, 3-phase

-400, Input Voltage 400V±10%, 3-phase

-480, Input Voltage 480V±10%, 3-phase

ESD Options

ESD Options